Share:


MPE Series Cylinder

Product Feature

1. It is compact, small and light.

2. Multi cylinders can be integrated to save room.

3. Mounting accessories are not necessary.

4. Cylinders of various specifications are optional.

 

Specification




Installation & Usage

1. When load changes in the work, the cylinder with abundant output capacity shall be ed.

2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

5. The medium used by cylinder shall be filtered to 40μm or below.

6. As both of the front cover and piston of the cylinder are short, typically too large stroke can not be ed.

7. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface.  Anti-dust caps shall be added in air  inlet and outlet ports. The front and back cover can not be dismantled, which shall be especially noticed.

 

Ordering Code



Symbol




Reference url 3D link : https://airtac-embedded.partcommunity.com/3d-cad-models/?info=airtac/cylinders/multi_mounting_twin_rod_and_tri_rod_cylinder/mpe_series/mpe_series.prj

 Inquiry - MPE Series Cylinder